Sawdust Pellet Production Line

Brief Introduction

TONY Brand 14-16Ton/Hour Wet Sawdust Pellet Manufacturing Plant can take wet sawdust,wood chips, various types of wood - related biomass materials, such as wood pallets,branches, wood logs, and wood shavings. After pretreatment and processing, wet sawdust is solidified into high - density wood pellet fuel. This fuel is an ideal substitute for coal and oil and plays a role in energy conservation and emission reduction.Sawdust Pellet Production Line

1. Capacity: 14-16Ton/Hour

2. Raw materials: Wet sawdust3. Moisture: Wet type, about 40%.

4. Application: All kinds of  wood sawdust or more waste wood raw materials

Suitable customers:Wood processing plants, furniture manufacturing plants, construction sites, andscaping companies and other places with advantageous sawdust resources

5. Finished Pellets Markets: Large power plants ,domestic heating, industrial heating, combustion heat, heating systems, boiler rooms, school canteens, foundry heat sources.

Processing Procedure

This Pellet line Will Use About 4 Process To Proceed Wet Sawdust With Moisture 40% Into 6-8mm Pellets.

It Mainly Contains:1.Drying Process→2.Pelletizing Process→3.Cooling Process→4.Packing Process Total 4 Process As Above.

The process mainly includes the following steps and equipment:

The process mainly includes the following steps and equipment:

1. Use the TONY rotary‑drum dryer  to reduce sawdust moisture content from 40% to 10%‑15%.

2. Use TONY vertical ring die pellet machine to produce pellets with a diameter of 6-8 mm.

3. Use TONY galvanized pellets cooler to cool the pellets from 80-90°C to 20-30°C.

4. Use TONY ton packing machine to pack the pellets into bags, each weighing 1 ton.

Main Machine List

Detailed Design Machine

Rotary Drum Dryer	Double Screw Cycling Silo	Vertical Ring Die Pellet Machine
1.To Dry The 40% Sawdust Into 10-15% Sawdust.   2.Model: THGD2.5-24*2sets 3.Capacity:7-8Ton/Hour/Set	1.To Stroage Sawdust Before Pellet Machine; Adjust The Speed Of Sawdust Entering The Pellet Machine 2.Model: TLC-7*2sets 3.Capacity:14-16Ton/Hour/Set	1.To Press Dry Sawdust Into 6-8mm Biomass Pellets 2.Model: TYJ860-III-250KW*4sets 3.Capacity:3.5-4.5Ton/Hour/Set 4.New 304SS Type
Galvanized Pellets Cooler	Ton Packing Machine	Belt Conveyor
1.To Cool Pellets From 80-90℃  Into 20-30℃ 2.Model: TCN-4*2sets 3.Capacity:14-16Ton/Hour	1.To Pack Pellets Into 1 Ton/Bags. 2.Model: TBD*2sets 3.Capacity:14-16Ton/Hour	1.To Transport Sawdust,Pellets. 2.Width: 80cm*8sets 3.Capacity:Designed With The Whole Line

Detailed Explanation

This Pellet Production Line Is Designed To Process Wet Sawdust At 40% Moisture Content Into 6–8 Mm Pellets Via Around Four Sequential Processes. Below Is The Full Lineup Of Machines And Essential Components Supplied By TONY For The Complete System. Feel Free To Get In Touch With TONY To Receive Further Details And An Official Quotation For This Wet Sawdust Pellet Plant.

Biomass Pellets- -Green Clean Energy

1.Wide availability and low cost: 

These materials are available in large quantities in wood processing plants, furniture factories, and other places. Some materials are available at low prices or even for free, effectively controlling the cost of raw materials. 

2.High and stable calorific value: 

The calorific value of wood pellets is usually 4000-5000 kcal/kg, and the combustion efficiency can reach more than 90%, which can stably provide heat to meet the needs of industrial heating and residential heating.

3.Complete combustion and low pollution: 

The pollutants such as sulfur dioxide and nitrogen oxides produced during the combustion process are much lower than those of coal, and the ash content is low, which has little impact on the environment and meets environmental protection standards.

Suitable Raw Materials

Projects

How To Chose TONY Pellet Production Line?

Shipment