Wood Pallets Pellet Production Line

Brief Introduction

1. Capacity: 10-12Ton/Hour

2. Raw materials: Dried wood pallets

3. Moisture: Dry type, about 10-15%.

4. Application: All kinds of  waste wood pallets or more waste wood raw materials

Suitable customers: Logistics and warehousing companies, various manufacturing plants, ports and airports, construction sites, large supermarkets and shopping malls, and other places where waste wood pallets have advantages

Processing Procedure

This Pellet line Will Use About 5 Process To Proceed Dried Wood Pallets With Moisture 10-15% Into 6-8mm Pellets.

It Mainly Contains:1.Crushing Process→2.Fine Crushing Process→3.Pelletizing Process→4.Cooling Process→5.Packing Process Total 5 Process As Above.

The process mainly includes the following steps and equipment:

1. Use TONY comprehensive chipper to grind dried wood  pallets with width 1.3m  into wood chips 25 - 55 mm in length.

2. Use TONY effective hammer mill to crush the 25-55 mm wood chips into 8-14 mm sawdust.

3. Use TONY vertical ring die pellet machine to produce pellets with a diameter of 6-8 mm.

4. Use TONY galvanized pellets cooler to cool the pellets from 80-90°C to 20-30°C.

5. Use TONY ton packing machine to pack the pellets into bags, each weighing 1 ton.

Main Machine List

Detailed Design Machine

Comprehensive Chipper	Effective Hammer Mill	Double Screw Cycling Silo
1.To Grind Wood pallets Width  ≤1.3m Into25-55mm Wood Chips.   2.Model: TPC1300-600-160KW With 24 Hammer Heads*1set  3.Capacity: 12-15Ton/Hour.	1.To Crush 25-55mm Wood Chips Into 8-14mm Sawdust. 2.Model: TFD75-160-160KW*2sets 3.Capacity: 5-6Ton/Hour/Set	1.To Stroage Sawdust Before Pellet Machine; Adjust The Speed Of Sawdust Entering The Pellet Machine 2.Model: TLC-6*2sets 3.Capacity:5-6Ton/Hour/Set
Vertical Ring Die Sawdust Pellet Machine	Galvanized Pellets Cooler	Ton Packing Machine
1.To Press Dry Sawdust Into 6-8mm Biomass Pellets 2.Model: TYJ760-III-160KW*4sets 3.Capacity:2.5-3Ton/Hour/Set 4.New 304SS Type	1.To Cool Pellets From 80-90℃ Into 20-30℃ 2.Model: TCN-4*2sets 3.Capacity:10-12Ton/Hour	1.To Pack Pellets Into 1Ton/Bags. 2.Model: TBD*2sets  3.Capacity: 10-12Ton/Hour

Detailed Explanation

This pellet manufacturing system converts dry wood pallets holding 10–15% moisture into 6–8mm finished pellets in around five sequential operations. Displayed underneath is the full set of machinery and essential spare parts offered by TONY for this complete pellet-making system. You may reach our team to request full technical specs and an official price proposal for this dry wood pallet pellet manufacturing system.

Biomass Pellets- -Green Clean Energy

1.Remarkable Eco-friendliness & Low Carbon Footprint 

Carbon Balance: Wood pellet fuel originates from timber processing leftovers including wood fragments and fine sawdust, classified as biomass power. Carbon dioxide captured while trees grow offsets emissions released during burning. This creates a carbon-balanced energy option and greatly lessens impacts on global warming. Minimal Contaminant Release: When combusted, these wood pellets generate tiny amounts of sulfur dioxide, nitrogen oxides and other contaminants, generally well below regulatory thresholds. Particulate discharge stays low as well, cutting airborne contamination and complying with tightening environmental requirements.

2.Diverse Feedstock Supply & Manageable Expenses 

Plentiful Input Resources: Primary feed materials cover offcuts, wood fragments, saw powder, tree limbs and tree bark from timber fabrication. Forestry workshops, furniture factories and pulp mills provide consistent, accessible supplies. Such scraps get repurposed into valuable products, lowering pollution risks from dumping or direct incineration. Economic Merits: Most feed materials count as industrial byproducts, keeping purchase expenses modest. In certain zones, biomass initiatives qualify for financial incentives, further trimming manufacturing and operational spending. This biomass power delivers better cost-effectiveness versus natural gas, fuel oil and alternative energy varieties.

3.Superior Burning Performance & Optimized Energy Utilization 

High Compactness: Wood pellets are pressed into solid form, reaching bulk density of 1.1–1.3 t/m³, far above loose logs or saw powder. They seldom break apart while burning, sustaining steady flame and continuous heat output. Thermal efficiency commonly surpasses 85%, versus merely 40%–50% for unprocessed firewood. Consistent Combustion: Uniform pellet dimensions and regular geometry support automatic feeding and combustion regulation. Paired with dedicated pellet burners, heat output can be finely tuned to cut energy loss, fitting scenarios demanding steady thermal supply.

Suitable Raw Materials

Projects

How To Chose TONY Pellet Production Line?

Company Profile 

SHANDONG TONY ENVIRONMENTAL PROTECTION SCI-TECH CO.,LTD is a comprehensive enterprise engaged in the research, fabrication and global sales of pellet machinery, with more than two decades of industry experience.

1.Service Philosophy: Prompt response, decisive action, precise judgement, thoughtful communication and comprehensive support.

2.Service Objective: Achieve client recognition by delivering high-standard after-sales support.

3.Service Response: Once equipment faults emerge, either within or beyond the guarantee term, our team will rush to the client’s premises upon receiving alerts to inspect and fix the failure.

4.Service Terms: The equipment guarantee lasts twelve months (consumable components excluded). Within this coverage, any defective components stemming from production flaws will be mended or swapped free of charge. After expiry, spare parts will be offered at prime cost. If hardware damage arises from improper manual operation by users, maintenance and component supply will be charged at cost rates.