Bamboo Pellet Production Line

Brief Introduction 

TONY Brand 9–10.5 Ton/Hour Damp Bamboo Pellet Fabrication Facility adopts moist bamboo as its primary feedstock. Following pre-processing and compression, raw bamboo gets shaped into dense bamboo pellet biofuel. This product acts as an excellent replacement for coal and crude oil, supporting energy preservation and emission control. It has achieved broad adoption within territories with plentiful bamboo reserves.

1. Capacity: 9-10.5 Ton/Hour

2. Raw materials: Wet Bamboo

3. Moisture: Wet type, about 40%.

4. Application: All kinds of bamboo materials suitable for pellet production.

Suitable customers: Bamboo product processing companies, large-scale farms, agricultural/forestry parks, areas with dense bamboo resources, biomass energy companies/fuel traders, green environmental protection technology companies, and other places where bamboo raw materials have advantages

5.Finished pellet sales outlets: Large power generating stations, household warming, factory heat supply, thermal combustion applications, heating infrastructures, boiler premises, school dining halls and heat sources for metal casting workshops.

As an experienced Chinese developer of pellet processing systems with more than 25 years of know-how, TONY delivers all-inclusive tailor-made schemes and full turnkey undertakings for global buyers. Available throughput spectrum: 0.8–100 Ton/Hour

Processing Procedure

This Pellet line Will Use About 6 Process To Proceed Wet Bamboo With Moisture 40% Into 6-8mm Pellets.

It Mainly Contains:1.Crushing Process→2.Fine Crushing Process→3.Drying Process→4.Pelletizing Process→5.Cooling Process→6.Packing Process Total 6 Process As Above.

The process mainly includes the following steps and equipment:

1. Use TONY comprehensive chipper to cut wet bamboo with a diameter of less than 25 cm into bamboo chips 25 - 55 mm in length.

2. Use TONY effective hammer mill to crush the 25-55 mm bamboo chips into 8-14 mm bamboo dust.

3. Use TONY rotary drum dryer to dry the bamboo dust with a 40% moisture content down to a moisture content of 10%-15%.

4. Use TONY vertical ring die pellet machine to produce pellets with a diameter of 6-8 mm.

5. Use TONY galvanized pellets cooler to cool the pellets from 80-90°C to 20-30°C.

6. Use TONY double packing machine to pack the pellets into bags, each weighing 15-50 kg.

Main Machine List

Detailed Design Machine

Comprehensive Chipper	Effective Hammer Mill	Rotary Drum Drye	Double Screw Cycling Silo
1.To Grind Bamboo φ ≤30 cm Into25-55mm Bamboo Chips.    2.Model: TPC1300-600-132KW With 6 Blades*1set   3.Capacity: 10-15Ton/Hour.	1.To Crush 25-55mm Bamboo Chips Into 8-14mm Bamboo Dust. 2.Model: TFD75-132-132KW*2 sets  3.Capacity: 4-5Ton/Hour/Set	1.To Dry The 40% Bamboo Dust Into 10-15% Bamboo Dust.   2.Model: THGD3-24*1set  3.Capacity:9-10.5Ton/Hour/Set	1.To Stroage Bamboo Dust Before Pellet Machine; Adjust The Speed Of Bamboo Dust Entering The Pellet Machine 2.Model: TLC-9*1set  3.Capacity:9-10.5Ton/Hour/Set
Vertical Ring Die Pellet Machine	Galvanized Pellets Cooler	Double Packing Machine	Belt Conveyor
1.To Press Dry Bamboo Dust Into 6-8mm Biomass Pellets 2.Model: TYJ860-III-220KW*3 sets  3.Capacity:3-4Ton/Hour/Set 4.New 304SS Type	1.To Cool Pellets From 81.To Cool Pellets From 80-90℃ Into 20-30℃0-90℃ Into 20-30℃ 2.Model: TCN-4*1 set  3.Capacity:9-10.5Ton/Hour 2.Model: TCN-4*1 set  3.Capacity:9-10.5Ton/Hour	1.To Pack Pellets Into 15-50KG/Bags.  2.Model: TPZ-50*1 set  3.Capacity: 9-10.5Ton/Hour	1.To Transport Bamboo Chips,Bamboo Dust,Pellets.  2.Width: 80cm*8 sets 3.Capacity:Designed With The Whole Line

Detailed Explanation

This pellet fabrication unit converts damp bamboo with a 40% water ratio into 6–8mm granulated biofuel via roughly six operational phases. Itemized underneath is the complete set of mechanical assemblies and essential fittings provided by TONY for this full granulating system. You may reach our team to collect comprehensive technical particulars and a formal cost proposal for this damp bamboo granulating facility.

Biomass Pellets- -Green Clean Energy

The wet bamboo biomass pellet project leverages the abundant bamboo resources to transform high-moisture, difficult-to-process wet bamboo waste (such as bamboo branches, bamboo bark, and bamboo scraps) into clean, renewable, and high-value-added biomass pellets. This resource-cycle project aims to address the solid waste pollution problem inherent in the bamboo processing industry while simultaneously generating clean energy to replace fossil fuels, achieving both environmental and economic benefits. The key to the success of the wet bamboo biomass pellet project lies in three key points:

1. Matching raw materials with production capacity: Avoiding raw material shortages caused by excessive production capacity or raw material waste caused by insufficient production capacity;

2. Matching equipment with raw material characteristics: Using specialized wet bamboo equipment, rather than general-purpose wood pellet machines, reduces equipment failures;

3. Matching products with market demand: Adjusting product specifications based on the needs of local customers (factories, power plants, and residential applications) ensures stable sales. In addition, the project needs to pay attention to environmental compliance and cost control (raw materials, labor, and energy consumption are core cost items), while leveraging policy support to reduce initial investment and ultimately achieve the dual benefits of "environmental protection + economy".

Suitable Raw Materials

Projects

How To Chose TONY Pellet Production Line?

Certificate